Hinge axis Tefcold SpareParts 12857

A hinge axis is the central pin or rod that allows a refrigeration door to swing open and closed without sagging or binding. In professional catering equipment, the axis bears the weight of the door and any insulation, keeping the seal tight and the movement effortless over thousands of cycles. Without a properly fitted axis, doors misalign, seals fail and cold air escapes, increasing energy use and shortening the life of the unit.

This Tefcold SpareParts hinge axis 12857 is a direct replacement for the original component in specified Tefcold refrigeration and freezer cabinets. It is installed by removing the old axis, sliding the new one into the hinge housing, and securing it with the retaining clip or screw supplied with the original door assembly. Once fitted, the door should open and close smoothly, with no lateral play or resistance.

The part is manufactured to match the dimensions and load rating of Tefcold commercial refrigeration units, ensuring compatibility with the door weight and hinge spacing of the original design. It is used in walk-in cold rooms, under-counter fridges, display cabinets and upright freezers where the manufacturer's hinge system requires this specific axis.

Cleaning is limited to wiping the exposed surfaces with a damp cloth to remove dust or grease; no lubrication or adjustment is needed once the axis is correctly seated.