Adjustable screw foot Tefcold SpareParts 14570

An adjustable screw foot lets catering equipment stand level on uneven floors without wedges or packing. Each foot threads into a base plate or frame, and the operator turns it to raise or lower one corner until the appliance is stable and the worktop is horizontal. This prevents spills, keeps doors and drawers aligned, and stops vibration from moving the unit during service.

The foot consists of a threaded rod that screws into a tapped hole in the equipment frame. A broad, flat pad at the bottom spreads the load and grips the floor. Turning the rod changes the height by a few millimetres per revolution, giving fine control over the final position. Once set, the foot locks with a jam nut or by friction in the thread, so the appliance stays level without further adjustment.

To use, place the appliance where it is needed. If it rocks, turn the screw foot at the low corner clockwise to raise it, or anticlockwise to lower it. Check with a spirit level across the worktop and repeat at each corner until the unit is stable. No tools are required beyond the fingers or a small spanner if the thread is tight.

The foot is made of plated steel for corrosion resistance and durability under kitchen conditions. It fits Tefcold refrigeration and freezing units, blast chillers, and other professional catering equipment that uses the same thread size and load rating.

Where the catalogue places the product: spare parts and accessories for commercial refrigeration and catering equipment.