Flexible hose MONOLITH 00403000119

A flexible hose designed for secure water connections in professional catering equipment, this Monolith model combines a stainless steel braid with a PVC inner layer. The construction allows the hose to bend and route easily around worktops, cupboards and appliances without kinking or restricting flow, while the braid reinforces the wall against internal pressure and external knocks that occur in a busy kitchen.

The stainless steel outer layer resists corrosion from water and cleaning chemicals, and the smooth PVC lining prevents scale build-up and allows water to pass without turbulence. Together, these materials give a hose that remains flexible over repeated use and retains its shape after being bent or coiled, so it can be stored compactly when not in service.

To install, the operator attaches one end to the water supply tap and the other to the inlet of Monolith model EROS001. The hose is tightened by hand until snug, then given a final quarter-turn with a spanner to seal without over-tightening. Once connected, water flows through the PVC core while the braid carries the pressure load, preventing the hose from ballooning or bursting under mains pressure.

The stainless steel braid and PVC inner layer are the only materials named, and both are chosen for their resistance to daily wear and pressure fluctuations. No additional fittings or clamps are specified, so the hose is supplied ready to connect with standard threaded ends.

Cleaning follows from the materials: the stainless steel braid can be wiped down with a damp cloth and mild detergent, while the PVC inner layer is rinsed through with water to remove any sediment. The hose should be disconnected and drained if it will not be used for an extended period, preventing stagnant water from accumulating inside.

This hose is specifically intended for use with Monolith model EROS001 and is catalogued under flexible water connections for professional catering equipment.