Drop-in refrigerated showcase SAYL BHS-DP-60-50C

A drop-in hot display case keeps prepared dishes at serving temperature without moisture or steam. The INTEGRO DP-60-50C uses a dry heat system: an electric element warms the air inside the sealed chamber, and a concealed fan circulates it evenly across every shelf. Because no water is added, the unit stays hygienic and requires no daily draining or descaling. The constant flow of warm air prevents cold spots, so every portion stays at the same temperature from the moment it is loaded until it is served.

The operator slides the dish onto one of the two adjustable shelves, closes the glass door, and sets the thermostat to maintain the chosen temperature. Dual LED strips above each shelf light the contents evenly, making colours vivid and textures clear. The door seals tightly, so the internal climate remains stable even when the unit is opened frequently during service. When the meal is ready to be served, the door opens smoothly and the dish is removed without disturbing the temperature of the remaining items.

The case is built as a single glass cube without external screws or joints. The edges are mitred and bonded, so there are no crevices where food debris can collect. The interior is lined with smooth, non-porous panels that resist staining and are easy to wipe down. Shelves rest on adjustable brackets that lock into place, allowing the operator to change the spacing for taller items or to remove the shelves entirely for deep cleaning.

A 530 W element draws power from a standard 230 V single-phase circuit, the same supply used by most professional kitchen appliances. The 600 mm square footprint fits into a 560 mm built-in aperture with a maximum surrounding thickness of 100 mm, matching the dimensions of other INTEGRO series cases so that hot, cold and neutral units can be installed side by side for a continuous run of display equipment. The hidden motor compartment sits below the chamber, keeping the customer view uncluttered while still allowing access for maintenance.

Cleaning is limited to the surfaces the entry names: the glass exterior is wiped with a damp cloth and mild detergent, the interior panels and shelves are removed and washed in warm soapy water, and the LED strips are dusted with a soft brush. The dry heat system eliminates the need for water trays or steam outlets, so there are no additional components to descale or sanitise.

The INTEGRO DP-60-50C is part of the INTEGRO series and can be combined with other INTEGRO drop-in cases to create a unified display line.