Door bracket for rollers, left Tefcold SpareParts 11957

A left-hand door bracket is the fixed pivot point that carries the roller on which a refrigeration or catering door swings. The bracket bolts to the cabinet frame and the roller sits in its cradle, allowing the door to open and close without binding. Because the bracket is fixed, it must be precisely aligned with its counterpart on the opposite side; any misalignment causes the door to drag or jam, increasing wear on the rollers and hinges.

To fit the bracket, the operator removes the existing door, positions the new bracket against the frame, marks the fixing holes, drills and taps if necessary, then secures the bracket with the supplied fasteners. Once both brackets are mounted, the door is re-hung and adjusted until it swings freely and seals evenly all round. Regular inspection of the bracket for cracks or distortion ensures the door continues to operate smoothly and the seal remains airtight.

The bracket is manufactured as a spare part for Tefcold refrigeration and catering equipment, matching the original specification for strength and fit. It is supplied without rollers or fasteners unless these are stated in the accompanying documentation.

Where the catalogue places the product: Tefcold spare parts, door hardware section.