Dishwasher basket trolley with plate shelf Novameta BHS-VTB4-57-50-79

A mobile rack that carries four standard 500 mm dishwasher baskets between wash and worktop stations, eliminating manual transfers and keeping crockery, cutlery and glassware together from rinse to storage.

The principle is simple: instead of lifting each basket individually, the operator slides the full baskets straight from the dishwasher onto the shelves of the trolley. The shelves are spaced to match the height of the dishwasher's exit rail, so the baskets roll on without tilting or jamming. Once loaded, the trolley is wheeled to the unloading point, where the baskets are lifted or slid onto cupboards, shelves or serving counters. This method cuts handling time, reduces breakage and keeps the wash cycle flowing without bottlenecks.

To use the trolley, position it flush against the dishwasher's exit. Slide each basket from the machine onto a shelf, starting at the bottom. When all four shelves are full, lock the brakes on the castors and wheel the trolley to the unloading station. There, reverse the process: slide or lift the baskets onto the worktop or storage unit. The shelves are open on three sides, so baskets can be accessed from front or sides without turning the trolley.

Construction is stainless steel throughout, with four flat shelves mounted on a tubular frame. The shelves have no lips or edges, allowing baskets to slide on and off smoothly. Four swivel castors, two with brakes, provide manoeuvrability in tight kitchen spaces. The footprint of 565 mm by 500 mm fits alongside most commercial dishwashers without blocking aisles.

The trolley has no controls; operation is purely mechanical. The four shelves are fixed at equal intervals, each sized to hold one 500 x 500 basket. The overall height of 787 mm allows the top shelf to clear most worktops while keeping the centre of gravity low for stability.

Four shelves mean the trolley can hold an entire wash cycle's output at once, reducing trips between dishwasher and storage. The 565 mm length matches the width of many under-counter and pass-through dishwashers, so the trolley aligns neatly with the machine's exit. The 500 mm depth ensures the baskets sit fully on the shelves without overhang. The 787 mm height keeps the load within easy reach for most operators without stooping or stretching.

Cleaning is straightforward: wipe the stainless steel shelves and frame with a damp cloth and mild detergent. The open construction allows water to drain and air to circulate, preventing moisture build-up. The castors can be removed for thorough cleaning if needed, though the entry does not specify a tool or method.

The trolley is supplied as a single unit, with no variants or accessories listed in the entry.

Catalogue placement: dishwashing accessories, mobile storage and transport.