Condenser fan BHS-HoReCa BHS-KEOV-D60x240D

A condenser fan draws ambient air across the refrigerant coils in a refrigeration unit, expelling the heat absorbed from the cabinet. The motor spins an impeller that pulls cool air in and forces warm air out, maintaining the pressure and temperature balance needed for efficient cooling. Without this airflow, the refrigerant would overheat, the compressor would labour, and the unit would fail to hold its set temperature.

The operator does not interact with the fan directly during normal use. Once installed, it runs automatically whenever the refrigeration cycle demands cooling. The fan starts when the compressor engages, pulling air through the condenser coils, and stops when the thermostat signals the target temperature has been reached. Its operation is continuous but silent, ensuring the refrigeration unit remains within its designed temperature range without manual intervention.

This BHS condenser fan is constructed with a durable motor housing and an impeller designed for sustained airflow. The fan is a direct replacement for refrigeration units operating in temperature ranges of -5 to +8 °C and -20 to +18 °C, covering both chilled and frozen storage sections. It fits models specified for 1 1/2 to 4 1/2 sections in the standard range and 1 1/2 to 2 1/2 sections in the wider temperature range.

Cleaning is limited to the external surfaces of the fan housing. Dust and grease can accumulate on the blades and housing, reducing airflow efficiency. A soft brush or cloth removes debris without disassembly, while compressed air can clear finer particles from the impeller. Regular checks ensure the fan remains unobstructed and operates at full capacity.

The fan is categorised under refrigeration spare parts, specifically for condenser assemblies in commercial refrigeration units.