Canteen accessory Novameta UNB1-61/61/70

A drop-in dispenser stores and releases dishwasher baskets directly at the wash station. The unit sits flush in a worktop cut-out, creating a level surface that eliminates trips over loose baskets and keeps the kitchen floor clear. Baskets are stacked inside the dispenser, and each one slides out from the front as the one above is removed, so the next basket is always ready without reaching or bending.

The operator loads the dispenser from the top, stacking up to five baskets in a single column. When a basket is needed, it is drawn from the front opening; the remaining baskets descend under their own weight, positioning the next basket at the same height. This gravity-fed sequence removes the need to lift baskets from the floor or carry them across the kitchen, reducing strain and speeding up the wash cycle.

Constructed in stainless steel, the dispenser resists corrosion from water and detergents. Its 610 mm square footprint fits into a standard 580 mm worktop cut-out, leaving a narrow margin for sealing. The 70 mm depth keeps the unit shallow enough to sit above most under-counter plumbing without interfering with pipework or cupboard doors.

The dispenser holds baskets sized 500x500x100 mm, matching the standard dimensions used in most commercial dishwashers. This compatibility ensures that baskets slide in and out smoothly, without jamming or tilting, and that the dispenser integrates with existing kitchen workflows without requiring new baskets or adapters.

Cleaning is limited to wiping the stainless steel surfaces with a damp cloth to remove detergent residue and water marks. The open front design allows easy access for inspection and cleaning, while the smooth interior prevents dirt from accumulating in corners or seams.