Bolt for roller Tefcold SpareParts 14610

A bolt designed to secure rollers within moving assemblies of professional refrigeration and catering equipment. Rollers allow heavy units such as under-counter fridges, display cabinets and mobile workstations to glide smoothly across kitchen floors, reducing strain on staff and preventing damage to surfaces. The bolt threads into the roller housing, clamping the axle firmly in place so the wheel turns freely without wobble or lateral play. Correct tension ensures quiet, even movement and extends the life of both the roller and the floor beneath it.

To fit the bolt, the operator aligns the roller with its mounting bracket, inserts the axle through the wheel hub, and threads the bolt into the tapped hole. A spanner or socket is used to tighten it until the roller spins freely but does not shift side to side. Over-tightening can bind the wheel; under-tightening risks the bolt loosening under vibration. Once secured, the unit can be repositioned as needed without lifting, making daily cleaning and service access quicker and safer.

The bolt is manufactured as a direct replacement for Tefcold equipment. It fits the makes and models specified in the Tefcold spare-parts catalogue, ensuring compatibility with the original roller assembly. No additional fasteners or modifications are required.

Cleaning is limited to occasional wiping with a damp cloth to remove dust and grease. The bolt itself requires no lubrication, as the roller bearings are sealed units. Regular inspection for tightness is recommended during routine maintenance checks to prevent loosening from vibration or heavy use.

This part is listed in the refrigeration spares section of the catalogue, under roller and wheel components.