Bar station accessory Novameta BHS-Z-BFG-60/55/87

A dishwasher basket frame provides a rigid, level support inside the machine so that loaded baskets slide in and out without tilting or jamming. The frame is fixed to the machine's base or side walls, creating a track that keeps each basket aligned with the spray arms and drain. This alignment ensures that water reaches every item and that the basket does not block the door seal or the detergent dispenser.

The operator loads the basket outside the machine, places it on the frame, then slides it forward until it locks into position. Once the cycle finishes, the basket is pulled straight back and lifted off the frame for unloading. The frame itself remains stationary, so it does not interfere with the door swing or the machine's internal airflow.

Construction is stainless steel for corrosion resistance in the wet environment. The frame's footprint of 595 mm by 550 mm matches the internal width of many under-counter and hood-type commercial dishwashers, allowing it to be bolted directly to the machine's chassis without modification.

Cleaning is limited to wiping down the frame with a damp cloth to remove detergent residue and food debris that may collect at the corners or along the runners.