Washing machine hose L5010200

A washing machine hose carries the water supply from the tap to the appliance, allowing fresh water to flow into the drum for washing cycles. The hose connects at one end to the water inlet valve of the machine and at the other to a standard 3/4 inch tap, forming a sealed link that prevents leaks while maintaining steady water pressure. This flexible conduit is essential for any commercial laundry or catering setup where washing machines handle large volumes of linen, uniforms or kitchen textiles.

To install, the operator screws the threaded 3/4 inch fitting onto the tap, ensuring a tight seal with the supplied washer. The opposite end attaches to the washing machine's inlet valve in the same way. Once connected, the hose remains in place during operation, carrying water whenever the machine calls for it during its programmed cycles. After use, the hose can be disconnected for cleaning or replacement without tools, though it is typically left in position for continuous service.

The 2000 mm length provides enough reach to position the washing machine away from the tap, allowing flexible placement in utility rooms, laundry areas or behind worktops. This distance also helps absorb vibrations from the machine during spin cycles, reducing strain on the connections and minimising the risk of leaks over time.

Constructed as a flexible hose, it bends easily to route around obstacles without kinking, ensuring uninterrupted water flow. The 3/4 inch connection matches the standard tap size used in professional kitchens and laundry rooms, making it compatible with most commercial washing machines and water supply points.

Regular inspection of the hose for signs of wear, cracking or bulging ensures continued reliability. If the hose shows any damage, it should be replaced promptly to prevent water leaks that could disrupt kitchen or laundry operations.