Solenoid SCHAERER Spare Parts 3341503000

A solenoid valve opens and closes the flow of liquids or gases in a hose line without manual intervention. An electric coil creates a magnetic field when energised, pulling a plunger against a spring. The plunger lifts from its seat, allowing fluid to pass; when power is cut, the spring returns the plunger, sealing the passage. This method gives instant, repeatable control over beverage dispensing, cleaning cycles or steam injection in professional catering equipment.

The operator connects the valve to a 24 V DC supply, typically from a control board or timer. When the circuit is live, the valve opens; when the circuit breaks, the valve closes. No intermediate steps are needed, so the sequence is set by the equipment's programme rather than by staff.

This solenoid valve is constructed for hose-line installation. The body and plunger are sealed against moisture and cleaning agents, and the connections match standard beverage hose diameters. The 24 V DC rating means it can be powered from low-voltage circuits common in modern catering equipment, reducing electrical hazards in wet environments.

Cleaning follows from the sealed construction: flush the hose line with approved cleaning solution while the valve is energised, then rinse with water. No disassembly is required, and the valve itself has no serviceable parts.

The article is a genuine SCHAERER spare part, listed in the beverage-equipment catalogue under solenoid valves for hose lines.