Silicone hose SCHAERER Spare Parts 3370063123

A silicone hose carries water, steam or liquid ingredients between components in professional beverage machines. The tubing is flexible, allowing it to bend around tight corners and fit into confined spaces behind worktops or inside cupboards. Because it does not kink or collapse, the flow remains steady, which keeps the machine operating without interruption. Silicone is chosen for its resistance to heat and to the acids and oils found in coffee, tea and milk; it also withstands repeated cleaning cycles without hardening or cracking.

The operator connects one end of the hose to the water inlet or pump outlet and the other to the boiler, brew group or dispensing tap. Clamps or quick-release fittings secure the ends, preventing leaks under pressure. Once installed, the hose remains in place while the machine draws water, heats it, and delivers the finished beverage. After service, the same hose may carry rinse water or cleaning solution, so it must tolerate both hot and cold temperatures without degrading.

This hose is a direct replacement for the original part in SCHAERER beverage equipment. It fits the specified connection points without modification, ensuring a secure seal and correct flow rate. Because it is made to the manufacturer's dimensions, it integrates with the existing clamps and fittings, avoiding leaks or flow restrictions that could affect performance.

Cleaning follows the same routine as the rest of the machine: flush with warm water after each shift and periodically run a descaling or sanitising programme. The smooth interior surface of silicone resists scale build-up, so the hose remains clear with regular maintenance. When the tubing becomes discoloured or stiff, it should be replaced to maintain hygiene and flow consistency.