Refrigerator GEMM 45002080

A refrigerated cabinet keeps food chilled by circulating cold air through a ventilated system. The evaporator coil removes heat from the interior, and a fan spreads the cooled air evenly across every shelf. This method prevents warm spots and keeps every container at the same temperature, whether it is placed at the front or the back. The insulation traps the cold inside, so the compressor runs only when needed, cutting energy use while maintaining a steady climate for fresh ingredients, prepared dishes and chilled desserts. The GEMM GN 2/1 XFN/70 is loaded through a single full-height door. Three GN 2/1 shelves slide onto adjustable rails, each rail offering 24 positions spaced 55 mm apart. The operator sets the desired temperature on a 2.8-inch touch panel, then the automatic defrost cycle and condensate evaporation run without further intervention. A door lock secains the contents, and internal LED lighting illuminates every shelf for quick identification of stored items. The cabinet is built from deep-drawn stainless steel, forming seamless internal walls that resist corrosion and simplify cleaning. An 80 mm insulation layer surrounds the interior, reducing heat transfer and stabilising the internal climate. The refrigerant R290 is used for cooling, chosen for its low environmental impact and efficient heat exchange properties. The touch control panel allows precise temperature adjustment between -2 °C and +8 °C, covering the storage needs of chilled meats, dairy, salads and desserts. The 0.425 kW power rating reflects the load on a standard 230 V single-phase circuit, typical in professional kitchens. The 115 kg weight indicates a sturdy construction that requires a fixed position or a heavy-duty trolley for relocation. The 700 mm width fits through standard kitchen doorways and aligns with worktop depths, while the 890 mm depth accommodates GN 2/1 containers without overhang. The seamless deep-drawn interior lets you wipe away spills in seconds without scrubbing corners or seams, keeping the cabinet ready for the next service. The seamless walls and rounded corners prevent dirt accumulation, and the automatic condensate evaporation eliminates manual water tray emptying. Shelves and rails can be removed for thorough cleaning, and the touch panel is wiped with a soft, dry cloth to avoid moisture damage. The cabinet is supplied with three GN 2/1 shelves, and additional shelves can be ordered to expand storage capacity. It is classified under climate class 5, ensuring reliable operation in warm and humid environments such as restaurant kitchens and catering facilities. This model is listed in the professional refrigeration section of the catalogue, under cabinets designed for GN container storage.