Hot water dispenser BRAVILOR BONOMAT 8.513.001.310

A stainless steel tank heats water or milk electrically, delivering a steady supply of hot liquid without requiring a permanent water connection. The heating element warms the contents to the temperature set on the adjustable thermostat, while a boil-dry protection circuit prevents damage if the tank runs empty. A pressure gauge and transparent gauge glass let the operator monitor the internal level at a glance, ensuring the unit is filled only when needed and never overfilled.

To use the heater, the operator pours in up to five litres of cold water or milk through the top opening. The adjustable thermostat is set to the desired temperature, and the unit is switched on. An indicator light illuminates once the contents reach the set point, signalling that hot liquid is ready to dispense. Because the tank is filled manually, the heater can be positioned anywhere in the kitchen, making it suitable for mobile stations, temporary setups or areas without plumbing.

The construction is a single stainless steel tank with an internal heating element and a front-mounted pressure gauge. The adjustable thermostat and indicator light sit on the control panel, while the gauge glass runs vertically beside the tank, showing the current water level. The 2.09 kW power rating draws a steady load on a 230 V single-phase circuit, typical of professional kitchen small appliances. The footprint of 210 mm depth by 423 mm width fits neatly on a worktop or shelf, leaving space for cups, jugs or other dispensing equipment.

Cleaning follows from the manual-fill design: the tank is emptied, rinsed and wiped down after each service period. The stainless steel interior resists staining and corrosion, while the external surfaces can be cleaned with standard kitchen sanitising agents. No permanent water connection means no scale build-up from hard water, simplifying maintenance.

The heater is supplied as a single 5 litre model, with no variants or accessories listed in the catalogue.