Hot water dispenser BRAVILOR BONOMAT 8.060.170.31002

A hot water dispenser supplies instant boiling water without a kettle or hob. The unit heats water in a sealed tank using an electric element, then holds it at near-boiling temperature. When the tap is opened, hot water flows out while cold water automatically refills the tank, keeping the level constant. Insulation around the tank reduces heat loss, so the water stays hot with minimal energy use.

To operate, connect the dispenser to a cold-water supply. The LED display shows the current temperature and the two programmable volumes. Set the desired cup sizes—typically 120 ml and 150 ml—using the controls. Press the button for the chosen volume; the tap dispenses the exact amount without spills. A drip tray beneath the tap catches any overflow, keeping the worktop dry.

The HWA14D is built entirely of stainless steel, front, sides and top. The 13.1 litre tank provides a steady reserve, while the 30 litre-per-hour output meets continuous demand. A dosing tap set at 140 mm above the base fits standard cup and mug heights. Automatic refilling eliminates manual top-ups, and the insulation minimises reheating cycles.

The 230 V power requirement matches a standard single-phase circuit found in professional kitchens. The footprint of 242 mm depth, 568 mm width and 501 mm height fits under most wall cupboards or on a worktop. The unit's weight allows it to be moved by one person for cleaning or repositioning.

Cleaning involves wiping the stainless steel surfaces with a damp cloth. The drip tray lifts out for emptying and rinsing. The tap and water inlet should be descaled periodically to prevent limescale build-up, following the manufacturer's instructions.

The dispenser is available in the standard configuration described. It is catalogued under professional water dispensing equipment for catering and hospitality.