More from this brand
Technical data
| Attributes | |
| ARTICLE | IN120/50-110C |
| POWER | 1.050 kW |
| SIZE L/W/H | 1200/ 600/ 1100 mm; Glass zone height 515 mm |
| VOLTAGE | 230V-50HZ |
| Temperature | +70ºC |
| WEIGHT | 180 kg |
| SHELVES | 2 adjustable shelves |
With LED
Temperature range +70ºC
A hot food showcase keeps prepared dishes at serving temperature while displaying them under glass for customer appeal. The unit circulates warm air around the food, preventing it from cooling and drying out. A heating element beneath the food tray warms the air, and a quiet fan spreads the heat evenly across every shelf. This method maintains consistent warmth without hot spots, so each portion stays fresh and ready to serve throughout service.
To use the showcase, plug it into a 230 V single-phase supply. Set the digital thermostat to the desired temperature up to +70 °C. Slide open the rear doors, load the food trays, then close the doors. The LED lighting switches on automatically, illuminating the contents. The internal sensors monitor the temperature and adjust the heating element as needed, so no further intervention is required until the next load.
The showcase is built from stainless steel and tempered glass, with a fibre-glass cover that resists impacts, fats and cleaning agents. Sliding rear doors provide access for replenishing stock and are removable for thorough cleaning. Adjustable legs allow the unit to sit level on any floor or worktop.
A power rating of 1050 W indicates the load on the electrical circuit. The 230 V requirement means the unit plugs into a standard single-phase outlet found in professional kitchens. The footprint of 1200 mm wide by 600 mm deep fits into most serving counters, while the 1100 mm height and 515 mm glass zone give clear visibility of the food from customer eye level.
Cleaning involves wiping the stainless steel and glass surfaces with a damp cloth and mild detergent. The rear doors can be removed for deeper cleaning, and the fibre-glass cover can be scrubbed without damage. The heating element and fan require occasional dusting to maintain airflow.
The INTEGRO IN120/50-110C is a single model with no variants.
This showcase is listed in the catering equipment catalogue under hot-holding and display units.