More from this brand
Technical data
| Attributes | |
| ARTICLE | DP-100-80 |
| POWER | 0,9 kW/ 1,5 kW - cooling capacity |
| SIZE L/W/H | 1000/ 600/ 815 mm |
| VOLTAGE | 230V 50HZ |
| Temperature | +2/+6ºC |
| WEIGHT | 130 kg |
| SHELVES | 3 adjustable shelves |
| Refrigerant | R290/120g |
| NOTES | Built-in dimensions: 960X560 mm; Maximum built-in thickness: 100mm |
These display cases offer an efficient solution for presenting products attractively without taking up additional store space. Installation is usually relatively simple, as they integrate directly into existing surfaces.
Temperature range +2/+6ºC
A refrigerated display case that fits directly into built-in furniture, keeping chilled products visible and accessible while maintaining a seamless countertop appearance. The unit circulates cold air behind the rear glass, drawing heat away from the interior and holding the temperature steady between +2 and +6 °C. This range keeps perishable items fresh without freezing them, making it suitable for ready-to-eat foods, dairy, and packaged salads that must remain chilled but not solid.
The operator loads products through the rear glass panel, arranging them on the three adjustable glass shelves. Each shelf can be repositioned to create taller or shorter gaps, accommodating everything from tall bottles to shallow trays. LED strips beneath each shelf cast an even glow across the products, eliminating shadows and making colours appear more vivid. The touch-screen thermostat on the front edge allows the operator to set the exact temperature and check the current reading at a glance. Once the case is plugged in, the refrigeration system starts automatically, requiring no further adjustment unless the ambient conditions change.
The case is constructed with double-glazed panels on all visible sides, providing clear visibility while reducing heat transfer from the surrounding room. The refrigeration motor is housed in a concealed compartment at the base, keeping the exterior sleek and quiet. The built-in dimensions of 960 by 560 mm and a maximum furniture thickness of 100 mm ensure the unit fits standard worktop cut-outs without modification. The overall footprint of 1000 by 600 mm leaves enough space for adjacent equipment while keeping the display area compact.
The three glass shelves are easy to remove for cleaning, and the rear access panel simplifies wiping down the interior. The LED lighting is sealed against moisture, so it can be wiped with a damp cloth. The touch-screen thermostat requires no calibration, but the operator can connect it to a remote monitoring system if the kitchen uses one.
The INTEGRO DROP-IN DP-100-80 is designed for built-in installation only and is not freestanding. It is placed in the SAYL catalogue under refrigerated display cases for built-in furniture.