More from this brand
Technical data
| Attributes | |
| ARTICLE | DP100-50 |
| POWER | 0,275 kW |
| SIZE L/W/H | 1000/ 600/ 515 mm |
| VOLTAGE | 230V-50HZ |
| Temperature | +2/+6ºC |
| WEIGHT | 120 kg |
| SHELVES | 2 adjustable shelves |
| Refrigerant | R600A 82G |
| NOTES | Built-in dimensions: 960X560 mm; Maximum built-in thickness: 100mm |
These display cases offer an efficient solution for presenting products attractively without taking up additional store space. Installation is usually relatively simple, as they integrate directly into existing surfaces.
Temperature range +2/+6ºC
A refrigerated display case that integrates directly into built-in furniture, keeping chilled products visible and accessible without occupying floor space. The unit cools air within an enclosed cabinet, circulating it evenly across the shelves to maintain a steady temperature between +2 and +6 °C. This range preserves freshness for dairy, deli items, desserts and pre-packaged foods while allowing clear customer views through double-glazed panels that also reduce heat transfer from the room.
The case is installed by cutting an opening in the worktop or cupboard front to the specified built-in dimensions, then lowering the unit into place. Once the mains plug is connected, the Plug & Play design requires no further setup; the compressor starts automatically and the thermostat brings the interior to the set temperature. Two adjustable glass shelves slide on internal rails, letting the operator organise the display height for tall bottles or shallow trays. Rear glass access allows restocking from behind the counter without disturbing the customer-facing presentation.
LED strips mounted beneath each shelf cast bright, even light across every product, drawing attention to colours and textures. The control panel is a touch-screen thermostat positioned at the front; it displays the current temperature and allows precise adjustment within the +2 to +6 °C range. The same panel provides connectivity for remote monitoring, so kitchen staff can check or change settings from a central system without opening the case.
The exterior is finished in stainless steel, matching standard kitchen equipment and resisting fingerprints. Double-glazed glass on the front and sides ensures insulation while maintaining visibility; the rear panel is also glass, enabling restocking from the service side. The refrigeration motor is concealed beneath the unit, keeping the customer view uncluttered and reducing noise at counter level.
Overall dimensions of 1000 mm wide, 600 mm deep and 515 mm high allow the case to fit within a standard worktop cut-out of 960 × 560 mm, with a maximum furniture thickness of 100 mm. The weight of the unit means it is moved on a trolley for installation, then secured in place to prevent shifting during use.
Cleaning involves wiping the glass panels with a damp cloth and mild detergent, and removing the shelves to wash them separately. The LED strips can be dusted with a soft brush, and the touch-screen thermostat should be cleaned with a dry microfibre cloth to avoid moisture damage.
The INTEGRO DROP-IN DP-100-50 is a single model with no variants; it is categorised under built-in refrigerated display cases in the SAYL catalogue.