Display case SAYL BHS-CON2N

A freestanding glass display case keeps chilled or ambient products visible while maintaining a neutral temperature throughout. The refrigeration unit circulates cooled air behind the rear panel, drawing heat away from the interior without creating frost. This steady, gentle airflow prevents condensation on the glass and keeps food at a consistent temperature, whether it is delicate pastries, plated dishes or pre-packaged items that must not freeze. The neutral setting allows the case to hold both chilled and room-temperature goods side by side, so operators can switch stock without adjusting the controls.

The operator loads the shelves from the front, sliding each tempered-glass shelf along its aluminium track. Items are arranged directly on the shelf or on serving platters; the internal LED lighting switches on automatically when the door is opened, casting an even glow across every level. Once the door is closed, the refrigeration cycle resumes and the temperature returns to the set point within minutes. The top section, which is shallower, is often used for smaller items or for products that benefit from eye-level visibility, while the deeper lower section holds bulkier trays and larger platters.

The entire structure is built from toughened glass panels joined without external screws, so there are no crevices where dirt can collect. The aluminium frame is powder-coated for durability and corrosion resistance. Each shelf is adjustable in height, allowing the interior to be reorganised for different product lines without tools. The refrigeration unit is housed in the base, drawing air in through a grille at the front and expelling it at the rear, so the case can stand against a wall or in the middle of a room without overheating.

The controls are mounted on a small panel at the front of the base. A digital thermostat sets the target temperature, and a separate switch turns the internal lighting on or off manually. The thermostat displays the current reading and allows fine adjustment in one-degree steps, so the operator can match the case to the specific requirements of the food being displayed.

The footprint of 1200 mm by 800 mm fits standard worktop depths and allows the case to be positioned against a wall or island unit without overhang. The total height of 1230 mm brings the top shelf to eye level for most adults, maximising visibility of the upper display. The top section itself measures 1200 mm by 600 mm by 265 mm, creating a separate, shallower display zone that can be used for impulse purchases or high-margin items. The weight of the assembled unit means it is moved on a trolley or pallet jack rather than lifted by hand.

Cleaning is limited to surfaces the entry names. The glass panels and shelves are wiped with a damp cloth and mild detergent; the aluminium tracks are brushed to remove crumbs and dust. The refrigeration grille at the front is vacuumed monthly to keep airflow unrestricted. Because there are no external screws or seams, the entire case can be sanitised quickly between shifts.

The INTEGRA Combi CON2N is supplied as a complete unit with both top and bottom sections included. No plumbing or additional installation is required, so the case can be placed and switched on the same day it arrives.

This model is listed in the SAYL commercial refrigeration catalogue under freestanding neutral-temperature display cases.