Display case SAYL BHS-COF2N

This freestanding glass display case offers a neutral upper section alongside a chilled lower compartment, enabling simultaneous display of ambient and refrigerated goods. Designed for standalone use, it fits seamlessly into any kitchen layout without requiring built-in support or additional worktops.

The ventilated cooling system maintains accurate temperatures in the lower section. Air circulates via a fan over an evaporator coil, extracting heat and releasing it through a rear condenser. The refrigerant, R290, efficiently absorbs heat, keeping the lower compartment between +4 and +8 °C. The upper section remains neutral, relying on natural airflow to preserve bakery items, confectionery, or plated dishes at room temperature while protecting them from airborne particles.

Position the case on a level surface near a 230 V power source. Connect the power cord and activate the rear isolator. The lower section cools immediately, while the upper section requires no temperature adjustment. Adjust the glass shelves to the desired height, then arrange products. LED strips along the interior frame provide even illumination, highlighting contents without shadows. The front panel's digital display confirms the lower compartment maintains the set temperature, allowing the unit to operate unattended.

Constructed from tempered glass panels joined without visible screws, the case presents a smooth exterior that cleans easily with a damp cloth. Shelves, also tempered glass, rest on internal aluminium rails, permitting height adjustments. The rear panel, made of stainless steel, houses refrigeration components and the condenser coil. A hinged door at the back allows access for cleaning the evaporator and replacing the air filter.

Controls include a digital thermostat for the lower section, a master on/off switch, and separate rocker switches for the upper and lower LED lighting. The thermostat sets the target temperature between +4 and +8 °C, while the lighting switches enable the operator to turn off LEDs during cleaning or when the case is unused.

Powered by a 230 V, 50 Hz supply, the unit has a 2250 W rating. Its dimensions—1200 mm wide, 800 mm deep, and 1230 mm high—fit standard worktop spaces. The top section extends the height by 265 mm and depth by 600 mm, creating a stepped profile that maximises visibility without expanding the footprint.

Daily cleaning involves wiping glass surfaces with a mild detergent. Remove shelves weekly for washing in warm water. Vacuum the condenser coil monthly to sustain airflow, and replace the internal air filter every six months to prevent dust build-up on the evaporator.

The INTEGRA Combi COF2N is delivered as a complete unit, including both top and bottom sections. No additional modules or variants are available for this model.