Display case SAYL BHS-COC5N

A freestanding glass display case that presents chilled and hot food simultaneously, the SAYL INTEGRA Combi COC5N keeps one section at neutral refrigeration while the lower compartment maintains a warm serving temperature.

The unit relies on separate cooling and heating circuits. A refrigeration system circulates cold air inside the upper showcase, removing heat from the food and rejecting it at the rear condenser. Below, an electric heating element warms the air, which rises naturally to keep plated dishes at serving temperature. Both circuits are controlled by thermostats that cycle the compressors and heaters to hold the set points without fluctuation.

The operator loads chilled items onto the adjustable glass shelves in the upper section and hot plated dishes into the lower well. Internal LED lighting switches on automatically, illuminating the products from above and below. The glass doors open outward for easy access, and the shelves slide out on runners for restocking. Once loaded, the doors close and the thermostats maintain the chosen temperatures until the display is emptied.

Construction is frameless, with tempered glass panels joined by internal aluminium extrusions. No external screws are visible, so the surfaces remain smooth for cleaning. The top canopy measures 1200 mm wide by 600 mm deep, while the main body extends to 1200 mm wide, 800 mm deep and 1480 mm tall. The entire unit stands on adjustable feet to level it on uneven floors.

Controls are minimal: a thermostat dial for the upper refrigerated section and a separate dial for the lower heated section. Each dial sets the target temperature within the range the entry specifies.

An 800 W power rating reflects the combined load of the refrigeration compressor, heating element and internal lighting. The unit plugs into a standard 230 V single-phase supply, drawing current typical of a medium-sized commercial appliance. The 1200 mm width fits a standard worktop run, while the 800 mm depth allows placement against a wall without blocking service aisles. The 1480 mm height keeps the top canopy at eye level for most operators, making loading straightforward.

Cleaning is simplified by the frameless design. The glass panels and aluminium extrusions wipe clean with a damp cloth and mild detergent. Shelves slide out for thorough cleaning, and the interior lighting diffusers lift off for access. The condenser coil at the rear requires occasional brushing to remove dust and maintain cooling efficiency.

The COC5N is supplied as a complete assembly: top canopy and main body are included in a single package. No additional installation or plumbing is required; the unit is ready for immediate use once positioned and levelled.