Counter refrigerator table without drawers GEMM 40331040

A refrigerated table keeps perishable ingredients chilled while providing a solid work surface for food preparation. The unit circulates cold air inside an insulated cabinet, lowering the temperature of stored items to slow bacterial growth and preserve freshness. A fan draws air over an evaporator coil, removing heat and maintaining an even chill across every shelf. This method prevents hot spots and ensures consistent cooling, even when the door is opened frequently during service. The GEMM THND/100 is loaded from the front with gastronorm 1/1 containers. The operator sets the desired temperature on the digital touch panel, and the remote condensing unit begins cycling refrigerant through the system. Cold air is distributed by a ventilated cooling system, keeping every container within the -2 to +8 °C range. When the automatic defrost cycle starts, heating elements melt any frost on the coil, and the condensate is collected and evaporated without manual intervention. The cabinet is built from stainless steel, inside and out, with a 50 mm insulation layer between the inner and outer walls. Two doors each hold one GN 1/1 shelf, and the 1080 mm worktop provides a hygienic surface for chopping, plating or holding mise en place. The technical compartment can be positioned on either side to suit the kitchen layout, and the unit is ready for plinth installation if a raised work height is preferred. A 230 V single-phase supply powers the compressor and controls, drawing 0.406 kW under normal operation. The 123 kg weight means the table is moved with a trolley or pallet jack, and the 1080 × 700 mm footprint fits standard kitchen aisles. The 760 mm body height allows comfortable access without stooping, while the 900 mm overall height clears most overhead cupboards and extractor hoods. Stainless-steel surfaces and seamless welds let you wipe away spills and sanitise the interior without trapping moisture or food debris. The stainless-steel interior and worktop are wiped with a sanitising solution after each shift. The automatic defrost system eliminates manual coil scraping, and the condensate tray is removed and washed weekly. Shelves and door seals are checked for wear and replaced as needed to maintain the seal and cooling efficiency. The THND/100 is supplied with two GN 1/1 shelves. Custom drawer configurations are available on request, and the unit meets Climatic Class 5 for stable operation in hot, humid environments up to +40 °C. This refrigerated table is catalogued under professional refrigeration for worktop units.