Counter refrigerator table without drawers GEMM 40202200

A refrigerated table keeps perishable ingredients chilled while providing a stable surface for food preparation or plating. The unit circulates cold air through a ventilated cooling system, drawing heat away from the stored items and expelling it at the rear. This continuous airflow maintains an even temperature throughout the interior, preventing hot spots and ensuring consistent chilling without freezing. The cooling cycle is controlled by a thermostat that switches the compressor on and off to hold the set point, while an automatic defrost programme periodically melts any ice build-up on the evaporator coils, keeping efficiency high and manual intervention low.

To use the table, slide GN 1/1 containers onto the supplied wire shelves behind each hinged door. Set the desired temperature on the 2.8-inch touch control panel; the digital display confirms the setting and shows the current interior reading. The ventilated system distributes cold air evenly, so every container receives the same chilling effect. When the door is opened, the fan pauses to minimise cold loss, then restarts once the door is closed. Condensate from defrosting is collected in a tray beneath the evaporator and evaporated by a small heating element, so no external drain is required.

The table is built from stainless steel throughout, inside and out, giving a smooth, corrosion-resistant finish that withstands daily cleaning and heavy use. A 50 mm insulation layer surrounds the interior, reducing heat transfer and keeping energy consumption low. The technical compartment can be positioned on either side to suit the kitchen layout, and the unit is pre-drilled for a plinth if a raised installation is preferred. Each door is fitted with a GN 1/1 shelf, and additional shelves or drawers can be ordered to match specific storage needs.

A 265 litre capacity provides space for multiple GN 1/1 containers, allowing organised storage of prepared ingredients, sauces or pre-portioned items. The 0.406 kW power rating reflects the load on the electrical supply; the table runs on a single-phase 230 V circuit, the standard in British commercial kitchens. At 78 kg, the unit is heavy enough to remain stable during use but can still be moved with a trolley or two people. The footprint of 1070 mm wide by 690 mm deep fits within most worktop runs, and the 810 mm height allows comfortable access without stooping.

Cleaning is straightforward: wipe the interior and exterior with a damp cloth and mild detergent, avoiding abrasive pads that could scratch the stainless steel. The automatic defrost system and condensate evaporation mean no manual draining is needed, and the smooth surfaces prevent dirt build-up. Shelves can be removed for deeper cleaning if required.

The TNG7D/100S is supplied with one GN 1/1 shelf per door; additional shelves or drawers are available on request. The unit meets Climatic Class 5, ensuring reliable operation in hot and humid environments up to +40 °C, making it suitable for busy kitchens with demanding conditions.

This refrigerated table is categorised under professional refrigeration for GN container storage.