More from this brand
Technical data
| Attributes | |
| ARTICLE | 7.211.005.201 |
| SIZE L/W/H | 615 / 325 / 155 |
Coffee station organizer
- : BRAVILOR BONOMAT
- Article number: 7.211.005.201
A mobile coffee service station keeps everything within reach while the operator pours. The holder provides two fixed positions for insulated thermos flasks, each flask holding hot liquid under its own lid. Around the flasks, five open compartments let the operator arrange single-use cups, lids, wooden stirrers, paper napkins and sachets of sugar or tea bags in a repeating sequence. The sequence is set once and then repeated by every user, so the next operator finds the same items in the same places.
The unit stands on a worktop or trolley. No power or water supply is needed; the flasks themselves maintain the temperature of the coffee or tea. The holder's footprint is small enough to fit on a standard catering counter, yet the compartments are sized to hold a full service run without constant refilling. Each compartment is open at the front, so the operator can see and reach the contents without lifting a lid or sliding a drawer.
The holder is built from stainless steel, shaped into a single tray with raised edges. The two flask positions are circular cut-outs with a retaining lip that keeps the flasks upright. The five compartments are formed by vertical dividers, each divider welded to the base and to the front and back edges. The base is flat and continuous, so any spills stay within the tray and do not run onto the worktop.
No controls are fitted; the holder is a passive organiser. The operator loads the flasks and the compartments, then leaves the unit in place for the next user. The dimensions of 615 mm wide, 325 mm deep and 155 mm high create a compact block that can be moved with one hand and stored in a cupboard when not in use.
Cleaning is limited to wiping the stainless steel surfaces with a damp cloth. The open compartments allow easy access, and the welded construction has no crevices where residue can collect. The holder itself does not require disassembly or special maintenance.
The holder is designed to fit standard BRAVILOR BONOMAT thermos flasks, though other flasks of similar diameter may also fit. Thermos flasks, cups, lids, stirrers, napkins and condiments are not included.