BA25S-I S/A Backbar Cooler

TEFCOLD BA25S-I S/A Backbar Cooler spare parts — the BA25S-I S/A is a medium-capacity backbar cooler with a built-in unit; the S/A (Self-contained) design means that all cooling system components are housed in a single block; its spare parts are essential for long-term performance in bars and cafés.

BA25S-I S/A spare part types

TEFCOLD BA25S-I S/A Backbar Cooler spare parts — spare parts required for the BA25S-I S/A model. Compressor — the built-in compressor is the main component of the cooling system; in the S/A model, the compressor is located directly in the cooler’s cabinet; replacement by a licensed specialist; see TEFCOLD spare parts. Door seals — rubber gaskets for hermetic door closure; worn seals must be replaced; see BA25S-I spare parts. Door hinges and closers — wear out from intensive use; regular lubrication and replacement; see BA20S-I spare parts. Condenser — built-in condenser; cleaning once per quarter; replacement when worn. Thermostat and control electronics — temperature regulation; see bar refrigerator parts.

S/A (Self-contained) cooling system

TEFCOLD BA25S-I S/A Backbar Cooler spare parts — S/A (Self-contained) means that all cooling system components are built into the cooler itself. Simpler installation — the S/A model does not require a separate unit block or piping; the cooler is ready for use immediately after connecting to electricity; see BA25S-I spare parts. Compact solution — the entire unit in one block; suitable for smaller spaces; see BA20S-I spare parts. Heat dissipation indoors — the S/A model releases heat indoors, unlike models with a separate unit that dissipate heat outdoors; ventilation must be considered; see TEFCOLD spare parts.

Differences between BA25S-I S/A and BA25S-I

TEFCOLD BA25S-I S/A Backbar Cooler spare parts — the BA25S-I S/A and BA25S-I models may differ in unit configuration. The S/A model — Self-contained; the unit is built into the cooler; no separate condensing block; more suitable for smaller spaces without room for an external unit; see BA25S-I spare parts. Spare parts — the main parts (seals, hinges) of both models may be identical; cooling system components may differ; when ordering, specify the full model designation; see BA20S-I spare parts.

Maintenance of the BA25S-I S/A model

TEFCOLD BA25S-I S/A Backbar Cooler spare parts — maintenance of the S/A model requires attention to the built-in condenser. Condenser cleaning — the built-in condenser is often located at the bottom or rear of the cooler; cleaning once per quarter with compressed air; a dirty condenser reduces cooling efficiency and increases energy consumption; see BA25S-I spare parts. Seal inspection — monthly; damaged seals cause temperature fluctuations and higher electricity bills. Temperature logging — weekly for HACCP needs; see bar refrigerator parts. Ventilation around the cooler — the S/A model requires sufficient air circulation around the cabinet for heat dissipation; ensure the cooler is not installed too tightly.

Frequently asked questions

Can the BA25S-I S/A be installed anywhere? TEFCOLD BA25S-I S/A Backbar Cooler spare parts — the S/A model releases heat indoors; ensure sufficient ventilation around the cooler; if the room is small or the heat load is high, cooling efficiency issues may arise; consult BHS for the most suitable model choice; see TEFCOLD spare parts.

How to clean the built-in condenser of the BA25S-I S/A model? TEFCOLD BA25S-I S/A Backbar Cooler spare parts — the built-in condenser is usually accessible at the bottom front or rear of the cooler; clean with compressed air or a soft brush; perform cleaning every 2–3 months in a bar environment; see BA25S-I spare parts.

Why choose BHS?

BHS – Baltic HoReCa Solutions supplies professional equipment for restaurants, cafés, hotels and canteens: more than 20,000 products from many manufacturers. Our specialists help you choose the right equipment and spare parts for your kitchen or bar.

Delivery

We deliver across the European Union. Delivery time and cost depend on the order volume and destination — contact the BHS team for an exact price and lead time.