GREDIL Stainless Steel Tables with One Sink, Shelf and Overhanging Top

GREDIL Stainless Steel Tables with One Sink, Shelf and Overhanging Top — the overhang addition to the sink table is a practical solution that allows keeping frequently used accessories right within working reach; this variant is especially valuable in compact kitchens, where every centimetre of width matters.

Construction of the table with sink, shelf and overhang

GREDIL Stainless Steel Tables with One Sink, Shelf and Overhanging Top — the GREDIL sink table with overhang construction is designed for proximity to the wall. Work surface and sink — a stainless steel work surface with an integrated sink; the work surface provides preparation space right next to the washing area. Lower shelf — a stainless steel shelf approximately 300–400 mm above the floor; storage for large dishes, dish racks and cleaning accessories; see GREDIL Stainless Steel Tables with One Sink and Shelf. Wall overhang — a horizontal stainless steel rod element attached above the table to the wall; hooks are hung on the overhang for accessories; additional storage zone without taking up extra space. Hook system — standard hooks can be freely moved along the overhang rod; allows adjusting the placement of accessories as needed.

Advantages of the overhang in the sink table

GREDIL Stainless Steel Tables with One Sink, Shelf and Overhanging Top — adding an overhang to the sink table provides a number of practical advantages. Cleaning accessories at hand — brushes, cleaning cloths, dishcloths; these can be hung directly above the sink; after use, they can be immediately rehung instead of being placed on the surface or shelf. Dish racks and sieves — dish racks used for washing can dry on the overhang; drying above the sink is more hygienic; see GREDIL Stainless Steel Tables with One Sink without Shelf. Professional accessories — kitchen ladles, skimmers, whisks; the overhang keeps them organised and within reach. Space optimisation — the overhang uses wall and air space above the table; no floor or work surface area is taken up.

Installation requirements and recommendations

GREDIL Stainless Steel Tables with One Sink, Shelf and Overhanging Top — the table with overhang has specific installation conditions. Wall requirement — the overhang is attached to the wall; the table must be placed directly against a wall; it cannot be used in a central room placement. Wall strength — the wall to which the overhang is attached must be strong enough for bracket mounting; see GREDIL Budget Stainless Steel Furniture. Height — the overhang is usually installed approximately 1600–1800 mm above the floor; suitable for staff of average height. Drainage and water supply — ensure access to cables and pipes from the wall side; plan this before installation.

Hygiene and HACCP

GREDIL Stainless Steel Tables with One Sink, Shelf and Overhanging Top — the complete GREDIL table with overhang system meets HACCP requirements. Stainless steel in all parts — both the work surface, sink, shelf and overhang are made of stainless steel; a uniform material throughout the unit. Ease of cleaning — a smooth surface and open construction allow easy cleaning of all parts of the unit; the overhang is cleaned with a damp cloth; see GREDIL Stainless Steel Tables with One Sink and Shelf. Hook hygiene — hooks should be washed regularly; they come into contact with frequently used accessories.

Frequently asked questions

Can an overhang be installed later on an existing GREDIL sink table? GREDIL Stainless Steel Tables with One Sink, Shelf and Overhanging Top — this depends on the specific model; for some GREDIL models, the overhang is a separate accessory that can be added later; contact BHS to find out the possibilities for a specific model; see GREDIL Budget Stainless Steel Furniture.

What weight can the GREDIL overhang support? GREDIL Stainless Steel Tables with One Sink, Shelf and Overhanging Top — the overhang's load capacity depends on the model and wall mounting; it is usually sufficient for lighter kitchen accessories; heavy metal equipment should not be hung; see the model description for exact load specifications or contact BHS; see GREDIL Stainless Steel Tables with One Sink without Shelf.

Why choose BHS?

BHS – Baltic HoReCa Solutions supplies professional equipment for restaurants, cafés, hotels and canteens: more than 20,000 products from many manufacturers. Our specialists help you choose the right equipment and spare parts for your kitchen or bar.

Delivery

We deliver across the European Union. Delivery time and cost depend on the order volume and destination — contact the BHS team for an exact price and lead time.