DB200S-I Backbar Cooler

TEFCOLD DB200S-I spare parts — the DB200S-I is a compact static DB series backbar cooler with a built-in unit; its 200 litre capacity and S (static) cooling ensure simple and reliable operation; its spare parts are essential for long-term performance in small and medium-sized bars.

DB200S-I types of spare parts

TEFCOLD DB200S-I spare parts — the spare parts required for the DB200S-I model. Compressor — power suited to the compact model; the S model has no fans; the switch cuts off all cooling; replacement by a licensed specialist; see TEFCOLD spare parts. Door seals — sealing gaskets for hermetic door closure; worn seals increase energy consumption; see DB200H-I spare parts. Door hinges and closers — wear from intensive use; regular lubrication and replacement; see DB300S-3-P spare parts. Condenser — built-in condenser; cleaning once per quarter. Thermostat and control elements — temperature regulation; see bar refrigerator parts.

DB200S-I and DB200H-I — choice of cooling methods

TEFCOLD DB200S-I spare parts — the main difference between the DB200S-I and the DB200H-I is the cooling method, which also affects the composition of spare parts. DB200S-I — static (S) cooling; simpler mechanics; no chamber fans; lower noise; smaller range of spare parts; see DB200H-I spare parts. DB200H-I — ventilation (H) cooling; chamber fan motors; more even temperature; faster defrosting; slightly higher noise; wider range of spare parts. Choice — the S model is more suitable for quieter locations with simpler maintenance; the H model for more intensive use; see TEFCOLD spare parts.

DB series in 200 litre format

TEFCOLD DB200S-I spare parts — the DB200 series offers DB series architecture in a compact 200 litre format. Compact size — the DB200 fits even in smaller bar back areas; available in a narrower width than the DB300 series; see DB300S-3-P spare parts. Built-in unit — I (Integrated) configuration; installation without a separate condensation block; see DB200H-I spare parts. Lower energy consumption — the 200 litre model uses less electricity than larger DB300 models; lower operating costs.

Preventive maintenance for the DB200S-I model

TEFCOLD DB200S-I spare parts — the DB200S-I compact static model requires regular maintenance. Seal inspection — monthly; seal hermeticity is particularly important for the compact model, as even a small energy leak significantly affects cooling efficiency; see DB200H-I spare parts. Condenser cleaning — once per quarter; the built-in condenser clogs in a bar environment. Temperature recording — weekly for HACCP needs; see bar refrigerator parts. Ventilation around the unit — the I model releases heat into the room; ensure adequate air circulation.

Frequently asked questions

Are the seals for the DB200S-I and the DB200H-I compatible? TEFCOLD DB200S-I spare parts — if both models use doors of the same size, the seals may match; parts for the cooling system (compressor, fans) differ; when ordering, specify the exact model designation; see DB200H-I spare parts.

Can the DB200S-I be installed in a built-in cabinet? TEFCOLD DB200S-I spare parts — the I (Integrated) model releases heat into the room; a ventilation gap is required for built-in installation; without proper ventilation, cooling efficiency decreases; consult BHS for installation requirements; see TEFCOLD spare parts.

Why choose BHS?

BHS – Baltic HoReCa Solutions supplies professional equipment for restaurants, cafés, hotels and canteens: more than 20,000 products from many manufacturers. Our specialists help you choose the right equipment and spare parts for your kitchen or bar.

Delivery

We deliver across the European Union. Delivery time and cost depend on the order volume and destination — contact the BHS team for an exact price and lead time.