Wall Shelves with Two Levels 400

Stainless steel Wall Shelves with Two Levels in 400 mm depth from the LSX2 system are the standard for HoReCa kitchen wall storage infrastructure in many professional kitchens. The 400 mm deep two-level shelf combines the widely recognised optimal shelf depth with vertical capacity doubling, offering a satisfactory solution for both width and height storage organisation. BHS supplies 400 mm two-level wall shelves for HoReCa needs.

400 mm depth – the standard choice for HoReCa kitchens

400 mm depth is widely accepted as the standard for HoReCa wall shelves for two reasons: it matches the natural reach of a person’s arm to the wall (from the front, a person can comfortably reach the entire shelf), and it corresponds to the dimensions of standard restaurant tableware and containers. Standard plates, bowls, cups, and GN 1/1 containers in medium sizes all fit comfortably within the 400 mm shelf depth. An additional advantage compared to a 300 mm shelf: 400 mm provides approximately 30% more storage area, allowing items to be placed in two rows, back to front. In the two-level LSX2 system, this depth is multiplied in height, offering the best storage capacity-to-space ratio of all LSX2 options.

Two-level LSX2 system – storage in height

The essence of the LSX2 two-level shelf system is that two independent shelf levels are mounted in a single wall unit. The upper and lower shelves can store different types of inventory – for example, frequently used tableware below and less frequently needed items above. Both shelves are accessible from the front of the wall, which is important for kitchen ergonomics. The two-level system is also more cost-effective than two separate single-level shelves, as it uses a single bracket mounting base. In the LSX2 system, the relative height between shelves is either fixed or adjustable – specify the exact model with BHS consultants.

AISI304 steel – food hygiene and durability

The 400 mm two-level wall shelves of the LSX2 system are made from AISI304 stainless steel, ensuring full compliance with HACCP food hygiene requirements. The smooth, non-porous surface of AISI304 steel does not absorb food oils, moisture or microorganisms – a critical factor for shelves located near cooking steam zones or water spray areas. The steel is resistant to rust and corrosion even under regular cleaning conditions, when shelves are cleaned with high-pressure water or steam cleaners. Each shelf level is individually removable (depending on the model) for cleaning, which is important for sanitary inspections.

HoReCa applications

In restaurant preparation kitchens, the LSX2 400 mm two-level shelf is the main wall storage unit above preparation tables – with tableware sets on the upper level and spices and sauces below. In large hotel kitchens, two shelf levels allow stock to be systematised by preparation stage or kitchen zone (hot kitchen vs. cold kitchen). In high-turnover canteens, the LSX2 400 mm shelf is chosen when a maximum number of tableware items or utensils must be stored in one wall segment. In café bar areas, the two-level shelf with 400 mm depth is popular for organising bar equipment and tableware. BHS supplies two-level wall shelves to HoReCa establishments.

Frequently asked questions

Can the LSX2 400 system be mounted on all wall materials? The LSX2 wall shelf is mounted on the wall using brackets that must be fixed to the wall according to the wall material (brick, concrete, built-in metal frame). For each type of wall material, appropriate mounting screws and anchors must be used. Consult BHS for the most suitable mounting solution for your specific wall material.

Are LSX2 400 shelves heavier than LSX1 versions? The LSX2 two-level system contains two shelf levels plus the connecting bracket system, so its total weight is greater than that of a single-level LSX1 shelf with 400 mm depth. The wall mounting fixtures must correspond to the total load (both shelves and the items placed on them). For detailed weight and load-bearing information, please confirm with BHS.

Why choose BHS?

BHS – Baltic HoReCa Solutions supplies professional equipment for restaurants, cafés, hotels and canteens: more than 20,000 products from many manufacturers. Our specialists help you choose the right equipment and spare parts for your kitchen or bar.

Delivery

We deliver across the European Union. Delivery time and cost depend on the order volume and destination — contact the BHS team for an exact price and lead time.